Open-source operations software
Cuts energy waste. Tracks inventory. Handles purchasing.
Built by an operator with 12 years in hospitality, from the front desk to the GM’s office.
Request a pilotDeployed across a multi-property portfolio.
- Open source
- Your data stays yours
- No per-seat licensing
- SOC 2 controls in implementation
The suite
Six modules. One backbone.
Start with one. Add the next on the same backbone, without a new system.
Available as a pilot
- HotelsEnergy, stock and purchasing on one backbone.
- RestaurantsThe same inventory and procurement tools, ready for a kitchen.
- Property managersStart with one property, then add the next module when you are ready.
Energy Hub · Available as a pilot
Energy Hub monitors water heaters and HVAC and alerts your phone when something drifts.
Runs on site on Home Assistant, ESP32 and IoTaWatt.
Saved this month
$0
Example data
Sensors
Tap a sensor to begin
Water heater
NormalOutlet temperature, last 24 h
—
Chart: example data
- 1
A sensor spots a change and sends one clear alert to your phone.
- 2
Open the alert to see which sensor needs a look.
- 3
Tap the sensor to see when the change started, over the last 24 hours.
- 4
The home screen shows what you’ve saved this month, in dollars.
Inventory · Available as a pilot
Inventory tracks your stock and shows what is running low.
Know what you have before you run out.
Procurement · Available as a pilot
Procurement turns what Inventory sees into purchase orders.
Purchasing stays in the same system that tracks your stock.
Grocery Ordering · Coming
Grocery Ordering is designed to order groceries and supplies from your stock list.
Designed to order from the stock list Inventory already tracks.
Direct Booking · Coming
Direct Booking is designed to take reservations on your own website.
Designed to take those bookings on your site, not only through OTAs.
Airport Hotels · Coming
Airport Hotels will run arrivals and shuttle operations around the clock.
Designed for late arrivals, early departures and short stays.
The apps
Apps that run on the hardware you already own.
On your team’s phones and computers, with sensors installed on site.
- HVAC: running while emptyCheck the thermostat schedule.Example locationEnergySaved this month$48
Sensors
Water heater140°FNormalFreezer−2°FNormalHVAC88%Needs a lookMain meter22 kWNormalExample data
Energy dashboard
Savings in dollars and one clear alert when a sensor drifts.
- StoreroomScan stockBath towels12 on hand · Low−+12+
Recent scans
Coffee pods84On handGuest soap40On handExample data
Inventory scanner
See what is on hand and what is running low.
- Shuttle tracker ComingArrivals runShuttle 14 min awayFlight landed 6:32Arrivals pickup6:40Door 3Front desk6:58Drop-off
Example data
Shuttle tracker
Flight board and shuttle GPS for airport runs. Coming.
Screens show example data.
How a pilot works
Four steps, then you decide.
We reply by email.
- 1
Request a pilot
Tell us about your business and what you want to fix first.
- 2
We reply by email
You get a fit for your business.
- 3
Run it on your site
The module you start with runs on your hardware, so you can see it work.
- 4
You decide
Keep it, add the next module, or leave with your data.
Security and data
It runs on your hardware. Your records stay with you.
A pilot is built to keep your data on your site. The request form never stores a message on our servers.
- Your hardwareBuilt to run on your own hardware, on site, on Home Assistant, ESP32 and IoTaWatt.
- Your recordsYour data stays on site. Export it anytime and leave with everything.
- The request formThe form opens your email app. Nothing from it is stored on a Prometheus Open server.
- No lock-inKeep the module, add the next one, or leave. Your system should outlive any vendor.
Open source
You can run it and keep it.
Your system should outlive any vendor.
Open source by design. Each module ships on the same backbone you can run and keep.
# Example: a Home Assistant automation for a water-heater alert
automation:
- alias: "Water heater: temperature drop"
trigger:
- platform: numeric_state
entity_id: sensor.water_heater_outlet
below: 125
for: "00:20:00"
action:
- service: notify.owner_phone
data:
title: "Water heater: temperature drop"
message: "Water heater temperature dropped. Check the burner or element."
FAQ
Questions operators usually ask.
What is Prometheus Open?
Open-source operations software for hotels, restaurants and property managers. It cuts energy waste, tracks inventory and handles purchasing, on one backbone you can run on your own hardware.
What can I pilot today?
Energy Hub, Inventory and Procurement are available as a pilot. Grocery Ordering, Direct Booking and Airport Hotels are coming.
How does a pilot work?
You request a pilot. We reply by email with a fit for your business. The module you start with runs on your site. You decide whether to keep it, add the next module, or leave with your data.
How is pricing set?
Simple pricing, per location. Start with energy. Add more when you’re ready. Essentials is $99 per location / month. Premium is $149 per location / month. Portfolio is custom-priced for groups that need more than Premium.
Where does it run, and who owns the data?
It is built to run on your hardware, on site, on Home Assistant, ESP32 and IoTaWatt. Your records stay with you. You can export them and leave with everything.
What happens when I submit the form?
The form opens your email app with your message. Nothing from the form is stored on a Prometheus Open server.
Who is it for?
Hotels, restaurants and property managers. Deployed across a multi-property portfolio.
Request a pilot
Request a pilot for your business.
Tell us about your business, where it is and what you want to fix first. We reply by email.
Deployed across a multi-property portfolio.